Saturday, November 9, 2013

How to mount Linux on flash drive


DOS Commands to make bootable usb(Flah drive)
      ********
        STEPS
      ********
first make iso image of the file which you want to make bootable through flash
drive, if you have it allready then fine.
Just mount it to any virtual drive by any iso image mounting software. Insert the
pendrive.

1.open command prompt

write these
2.>cd\

3.>diskpart (new dos window will appear--swith to new window)

4.>list disk (Shows the list of disks)

5.select disk 0/1/2/3/.. (In place of 0/1/2/3/.. write the disk sequance which is
of USB pendrive,just see the
size and recognize the pendrive sequance,,, let here a
variable "y")

6.>clean

7.>create partition primary

8.>select partition y

9.>active

10.>format fs=fat32 ( wait till the flash deive is formatted....)

11.>assign

12.>exit ( go to old(main window)

13.>xcopy (source mounted drive letter):\*.* /s/e/f (destination mounted drive
letter(flash drive)):\

it will take time and when it is done ... you done it!!!


www.soft9871.co.cc

Create a file with blank name in Windows


Q: How to create a blank folder or File name?

A: To create a file with blank name(i.e. the name will be nothing).
To do this right click over the file and click on rename option.
Now press the following keys without pressing any key...
"Alt+0160" or "Alt+255"
and then press enter.

Note:- To enter the numeric value use numkeypad i.e. the number keys in the right side of the keyboard. If you are using laptop then first activate the number keys.



Q: How to hide a file?

Two options--
1. In advanced setting of the file check the hide option there.
2. First rename the file by a blank(null) file name by above ways, and then change the icon of the file by any of transparent file provided by windows in default icons.


Right Click the New Folder, go to Properties, then to Customize, and then click Change Icon. Here is the trick, go to the middle and you should see some blank spaces. Those are transparent icons, select one of those then press OK -> Apply -> OK.